2007 Shelby GT500 – Autopower Roll Bar + Harness – Completed

Welcome to our blog. Today we are working on a beautiful 2007 Shelby GT500 that is raced in the Silver State competition. We will be removing his current harness bar and installing a race bar and harness from Autopower. We started off by removing some of the interior. With that done, the roll bar was brought in and squared in the vehicle. Once mocked up we could then make our marks for drilling. With the front bar bolted down, we could then make our template for cutting the interior panels. Now it was time for some drilling. With that done the rest of the interior could be reinstalled and the carpet cut to make room for the roll bar. With that done it was time to install the harnesses. Using the supplied hardware the floor was drilled and plated for the eye bolts. With the eye bolts installed we could mock up the belts and get them adjusted. Now this thing is ready for the race track! Be sure to check back for more installs!

 

Advertisements

~ by renegademustangs on April 4, 2011.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

 
%d bloggers like this: